CBD For The People Raw 81% Uncut Wax Cartridge X3

Save 17%
$59.99
$49.99

About CBD For The People Raw 81% Uncut Wax Cartridge X3:

MUST use the X3 cartridge with the EliteHEAT™ battery only. We do not recommend using any other battery with this cartridge.

Let us explain why:

The X3 is our flagship cartridge, with potency over 80% and effectiveness like you wouldn’t believe. We’ve been trying to make this puppy happen for the better part of a year, but we kept running into one pesky little snag: Chemistry. (What a jerk, am I right?)

Turns out the CBD molecule is really big and likes to crystallize at concentrations over 60%, and there isn’t a dang thing you can do about it. Any attempts to make a cartridge stronger than our game-changing X2 ended up with wax that would turn into CBD rock candy, get stuck halfway up the cartridge, refuse to flow down into the intake holes, and make us really sad.

But fear not! For we found a way.

This bad boy is the grooviest 510-thread-compatible cartridge battery you’ll ever see. It’s got all the main features of our super-rad FTP Elite battery PLUS an awesome warming chamber that ensures even the thickest, most crystallized cartridges can flow and provide a consistent vaping experience.

Now you can TRY to use the X3 cartridge with a regular battery, but be warned – the cartridge has to be kept upright at all times or the wax will get stuck, and it might get stuck anyway. You should probably be ready to bust out a hair dryer to melt the wax down a bit just in case. If dealing with all that noise isn’t your jam, go up one paragraph and we’ve got you covered.

To reiterate: For the best results, use the X3 cartridge with the EliteHEAT™ battery only. We do not recommend using any other battery with this cartridge. It will probably not end well.

X3 Cartridge & Battery Instructions Items needed:

  • X3 cartridge (full or half gram)
  • EliteHEAT™ battery
  • Preheat chamber (separated from battery)
  • You!
  • One or more of your favorite people (optional)

Step 1: Turn on the battery, if it’s not on already. Click the button 5 times really fast (one-two-three-four-five, within 1 second).

Step 2: Ensure the battery is set to the correct voltage setting – we recommend starting with white and going up from there. To cycle voltages, triple-tap the button (one-two-three, within 1 second): White – Blue – Green – Red – reset (White)

Step: Screw the cartridge onto the battery threads. Make sure the airflow holes are open (this is muy importante).

Step 4: Slide the preheat chamber over the cartridge and screw it onto the battery.

Step 5: If the wax is solid – looks like tiny rock candy crystals, doesn’t flow at all – DO NOT PANIC; this is what you got the EliteHEAT™ for. Double-tap the button to start a preheat cycle, which lasts for 90 seconds if you let it do its thing. You’ll see the color change on the button as it goes – this is the voltage increasing every 30 seconds to fully heat the cartridge. So cool, right?! If the weather is cold, the A/C is bumping, or you’re in a walk-in refrigerator (we don’t judge) you might actually want a second warming cycle to fully liquefy the X3. This is some gnarly-thick wax, it’s just the nature of the beast. Still beats sitting there with a hair dryer.

Step 6: It’s vaping time! Hold down the button while inhaling through the cartridge tip. If this is your first X3, start with SMALL PUFFS. Again…gnarly-thick wax. Treat it with respect.

Step 7 (optional): Once you’re done, turn off the battery by repeating step 1.

Full Spectrum CBD Products contain 0.3% or less THC per serving. These products are trace amounts of THC and are legal in the United States.

About CBD For The People:

Full-spectrum lab results at every step of extraction. Certified non-GMO and organic ingredients. Traceability from seed to shelf. Raw oil is supercritical CO2 extracted and decarboxylated. Tested 100% free of residual solvents, microbiological contaminants, pesticides, and heavy metals to ensure product perfection.

Why is our pricing so affordable? Because CBD is not about huge profits, it’s for the people! Everyone should be able to grow this in their backyard, but we live in confusing times. So until that day comes, we aren’t here to make millions. We are here to put CBD into the hands of those who need it most, but can’t afford it. It’s about time someone offered a high milligram, quality, lab-tested CBD product with an easy price tag.

We take care of the people first, and the people take care of our business. We work hard to offer a top-shelf quality product at an affordable price. CBD is and has always been for the people. Remember to smile, love your life, and live every moment to the fullest! We hope our CBD can help you do that in some way!